Product

IAR-620/620+

Industrial 802.11a/b/g/n Access Point 3.5G Router



Key Features

 

  • WLAN interface support up to 300Mbps link speed
  • Provide HNAT enhance LAN to WAN routing performance
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X  Authentication supported.
  • Secured Management by HTTPs
  • Support STP(802.1D) for wireless redundancy
  • Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE,Modem/Dial Up
  • IP table to prevent access from unauthorized IP address
  • Support VPN for secured network connection (Open VPN , PPTP VPN)
  • Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
  • Support DHCP forwarder through PPTP function
  • 3G Modem signal information display (un-connecting status)
  • Wireless connecting status monitoring
  • USB interface support 3.5G HSDPA USB Modem dial up
  • 1KV isolation for PoE P.D. port of IAR-620+
  • Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Product Description

IAR-620 / IAR-620+ is a reliable IEEE 802.11 a/b/g/n WLAN VPN router with 2 ports 10/100Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Modem (56K/GPRS/3G/3.5G Modem) dial up. In the mode of Modem dial up, it support both traditional 56K modem and GPRS/3G/3.5G Modem with USB interface. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modems. In addition, IAR-620+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IAR-620 / IAR-620+ is one of the best solution for applications of wireless communication.